PLC 3 months training

Burraq Engineering Solutions is a company that provides PLC training in Lahore for individuals and organizations. These courses are designed to teach students how to program and troubleshoot PLCs as well as how to integrate them into industrial control systems. Training typically covers topics such as PLC programming languages, PLC hardware and software, and PLC communication protocols. Training may also include hands-on exercises and projects to give students hands-on experience working with PLCs. Burraq Engineering Solutions also provides other training and solutions related to industrial automation and control. 

A PLC (Programmable Logic Controller) is a type of computer commonly used in industrial control systems and other applications to monitor and control various equipment and processes. PLCs are designed to be rugged and reliable and can be programmed to perform a wide variety of tasks such as monitoring sensors, controlling actuators, and communicating with other devices. They are often used in manufacturing, automotive, and other industrial environments where real-time control and monitoring are required. Burraq Engineering Solutions is an engineering institute providing PLC 3 months of training courses in Lahore Pakistan.

Course Outline of PLC 3 Months Course

  • Introduction and History of PLC 
  • Introduction to the TIA portal and its installation
  • Programming languages still, fad, ladder,.
  • Making Simple Program in TIA 
  • Add or remove PLC controllers IN the TIA program 
  • Going online with s7-1200 plc via TIA
  • Connecting s7-1200 via Ethernet
  • Topology, network, and device views
  • Upload /download program in PLCs
  • Working with a different type of simulators like PLCSIM and s7-plim simulating 
  • modules
  • Integration of simulator with TIA and their offline control
  • Monitoring of plc program while online 
  • Checking and setting the CPU /CONTROLLER and module properties
  • Create tags for the I/O of the CPU.
  • Create a simple network in your user program
  • Use the PLC tags in the tag table for addressing the instructions
  • Inserting new networks and deleting them
  • Adding empty box, open and close branch as well as inserting inputs
  • Program blocks and main OB
  • Bit Logic Instructions NO, NC, COIL
  • Word Logic Operations, AND, OR NOT, NAND, XOR, XNOR
  • Assignments and negative assignments
  • Set/reset coil with flip-flops
  • Timers TP, TON, TOFF and time accumulators
  • Counters UP, DOWN, UP/DOWN
  • Range and validity functions
  • Comparator Like equal to, not equal to, less than, greater than etc.(=,> ,< ,>=,<= )
  • Arithmetic Functions like to add sub, MUL, DIV,MOD, NEG,INC, DEC,ABS,MIN, MAX,
  • LIMIT
  • MOVE Block FIELD READ, FIELD WRITE, etc. 
  • Advance Functions like SWAP, CONVERT, CEIL, FLOOR
  • Special Functions
  • Plc tags and adding a new tag table
  • Plc data types, int, float, double, byte etch, and how to add them
  • Plc troubleshooting and maintenance
  • Watch and force table and how to add them in the project
  • Introduction to analog and digital sensors
  • PT100, opt electrical, limit switches
  • Integration of sensors with plc and taking values in TIA
  • Calibrating analog sensors RTD and Thermocouple
  • Reading analog sensor value from the TIA portal
  • Going online problems and their solutions
  • WinCE Runtime Advanced
  • Implement PLC Programming in Factory Environment
  • Intro to VFD and frequency drives
  • VFD parameter setting in FUJI
  • Connect VFD with PLC and control by current change
  • HMI (Human Machine Interface) Section
  • Learn to Program  WIENTEK HMI
  • Learn to design in Utility manager
  • Creating tags in HMI in utility manager
  • Adding buttons ,lamps , numeric inputs and outputs 
  • Connect HMI with plc
  • Download program in HMI as well as online and offline simulations 
  • HMI and plc connection problems and solutions
  • Reading  senor value at HMI
  • Controlling motors from HMI
  • WinCE Runtime Advanced
  • Programming with Factory I/O
  • Introduction to SCADA
  • Quick Review of PLC HMI SCADA Level 1 Course.
  • Jump and Label instruction in TIA Portal S7 1200/300/400 PLC
  • How to make Functions (FC) in TIA Portal
  • What is Cross Reference?
  • FCs calling in Main (OB)
  • Difference between FC and FB
  • How to make FB in TIA and How to call it
  • Introduction to Factory I/O
  • Factory I/O Environment
  • Understand industrial automation components on Factory I/O
  • Configure and program Factory I/O Applications
  • Understand and develop logic on real-time applications
  • Create and program your own automation applications
  • Understand the uses of sensors, switches, actua,tors and conveyors
  • Interface & Configure different PLC Programming Software with Factory I/O
  • RTUs concept using Provirus
  • Motor Control with VFD
  • Parameters setting of Analog IO’s in VFD from control terminals
  • Connections of Analog IO’s (0-10V or 4-20mA)
  • Forward Reverse of Motor using keypad
  • The forward reverse of the Motor fan from external signal
  • Controlling the Motor Acceleration and Deceleration time
  • Frequency setting range up to 120Hz
  • PLC wiring of Analog IO’s with VFD
  • Motor Speed control using VFD through PLC Motor Speed control from the thermocouple
  •  Through temperature.
  • Read and Write major parameters of VFD on HMI (winter) via MODBUS RTU using 
  • RS485
  • Two VFDs/Motors Operate with their feedback (McMaster-SlaveVFDs
  • Introduction to SCADA
  • SCADA system application( Oil GAS / factory /Metro/ Solar Power Plant /Steel Plant )
  • System overview TIA Portal, 
  • WINCC Explorer Professional
  • Creating a WINCC Explorer Professional project
  • Configuring the connection to the WINCC Explorer automation system
  • Structuring the operator interface
  • Data & Communications
  • Project overview
  • Project Management
  • Running the Project
  • Multiuser project and client project
  • WINCC Explorer SCADA Graphic Designing
  • WINCC Explorer SCADA Reporting
  • WINCC Explorer SCADA connection with SQL Database by taking value of 
  • Temperature/pressure/flow/level etc.
  • Alarm Logging
  • Tag logging & Trend display
  • Gauges, sliders, motors, pipes, tanks and other object designing on 
  • WINCC Explorer SCADA.
  • Fundamentals of creating graphics displays for human machine interfacing
  • Navigating through the plant displays
  • User administration
  • Message representation, message logging, message configuring
  • Variable logging, trend configuring and trend plotting
  • Trend plotting, and message representation including logging of data in the database
  • Graphical Animation
  • Web Buttons
  • Slider Movement
  • Visibility
  • More Animations
  • Server-side Scripting
  • Client-side Scripting
  • Many side scripting
  • Database
  • Recipes
  • Introduction to webserver
  • SCADA direct Communication with PLC
  • SCADA to PLC Communication via webserver
  • SCADA to PLC Communication via Webserver and Modbus
  • Learn to Program  WIENTEK HMI
  • Learn to design in a Utility manager
  • Creating tags in HMI in the utility manager
  • Adding buttons, lamps, numeric inputs, and outputs 
  • Connect HMI with plc
  • Use VNC Viewer
  • Connect HMI with Cloud

PLC 3 months training

  • Fee: 50,000
  • Duration: 3 Months
  • Timing:  9AM-11AM, 11AM-1PM, 1PM-3PM, 3PM-5PM, 5PM-7PM, 7PM-9PM
Scroll to Top