December 1, 2022
November 8, 2022

PLC HMI Basic Level Training in Lahore

0 Enrolled

Burraq Engineering Solutions is providing physical training of PLC HMI SCADA Level 1 in Lahore. BES is best training institute which is offering its services in delta PLC training. We are also providing online training of Siemens PLC training online for all over Pakistan. We are providing our services in Electrical Automation and Electrical Engineering from last 8 years with 5000 + students. Due to rapid increase in online education, we launched a platform Lyskills from where you can get access to our online video training courses in very cheap price.

Fee: 15,000

Duration: 4 Weeks

Timing:  9AM-11AM, 11AM-1PM, 1PM-3PM, 3PM-5PM, 5PM-7PM, 7PM-9PM

PLC HMI SCADA Course Outline


  • Introduction and History
  • Introduction to TIA portal and its installation
  • Programming languages stl ,fbd,ladder ,.
  • Making Simple Program in TIA
  • Add remove PLC controllers IN TIA program
  • Going online with s7-1200 plc via TIA
  • Connecting s7-1200 via Ethernet
  • Topology, network and device views
  • Upload /download program in PLCs
  • Working with different type of simulators like PLCSIM and s7-plsim simulating modules
  • Integration of simulator with TIA and their offline control
  • Monitoring of plc program while online
  • Checking and setting the CPU /CONTROLLER and module properties
  • Create tags for the I/O of the CPU.
  • Create a simple network in your user program
  • Use the PLC tags in the tag table for addressing the instructions
  • Inserting new networks and deleting them
  • Adding empty box, open and close branch as well as inserting inputs
  • Program blocks and main OB
  • Bit Logic Instructions NO, NC, COIL
  • Word Logic Operations, AND, OR NOT, NAND, XOR, XNOR
  • Assignments and negative assignments
  • Set/reset coil with flip-flops
  • Timers TP, TON, TOFF and time accumulators
  • Counters UP, DOWN, UP/DOWN
  • Range and validity functions
  • Comparator Like equal to, not equal to, less than, greater than etc.(= ,> ,< ,>= ,<= )
  • Arithmetic Functions like add sub,MUL,DIV,MOD,NEG,INC,DEC,ABS ,MIN,MAX,LIMIT
  • Advance Functions like SWAP, CONVERT, CEIL, FLOOR
  • Special Functions
  • Plc tags and adding new tag table
  • Plc data types, int, float, double, byte etch and how to add them
  • Plc trouble shooting and maintenance
  • Watch and force table and how to add them in project
  • Introduction to analog and digital sensors
  • PT100, opt electrical, limit switches
  • Integration of sensors with plc and taking values in TIA
  • Calibrating analog sensors RTD and Thermocouple
  • Reading analog sensor value from TIA portal
  • Going online problems and theirs solutions
  • WinCC Runtime Advanced
  • Implement PLC Programming in Factory Environment
  • Intro to VFD and frequency drives
  • VFD parameter setting in FUJI
  • Connect VFD with PLC and control by current change
  • HMI (Human Machine Interface) Section
  • Learn to Program WIENTEK HMI
  • Learn to design in Utility manager
  • Creating tags in HMI in utility manager
  • Adding buttons ,lamps , numeric inputs and outputs
  • Connect HMI with plc
  • Download program in HMI as well as online and offline simulations
  • Hmi and plc connection problems and solutions
  • Reading senor value at HMI
  • Controlling motors from HMI
  • WinCC Runtime Advanced
  • Programming with Factory I/O
  • Introduction to SCADA

Course Content

About the instructor

0 (0 ratings)

45 Courses

2 students

Durations: 55 hours
Lectures: 0
Students: Max 0
Level: Intermediate
Language: English
Certificate: Yes
Notice bar for all your custom notifications for your site visitors. Tweak them as you like using flexible options.