December 1, 2022
November 8, 2022

PLC 1 Year Diploma

1 Enrolled

Fee: 1,50,000

Duration: 1 Year

Timing: 9AM-11AM, 11AM-1PM, 1PM-3PM, 3PM-5PM, 5PM-7PM, 7PM-9PM


Course Outline of PLC Diploma


  • Introduction and History
  • Introduction to TIA portal and its installation
  • Programming languages stl ,fbd,ladder ,.
  • Making Simple Program in TIA
  • Add remove PLC controllers IN TIA program
  • Going online with s7-1200 plc via TIA
  • Connecting s7-1200 via Ethernet
  • Topology, network and device views
  • Upload /download program in PLCs
  • Working with different type of simulators like PLSIM and s7-plsim simulating modules
  • Integration of simulator with TIA and their offline control
  • Monitoring of plc program while online
  • Checking and setting the CPU /CONTROLLER and module properties
  • Create tags for the I/O of the CPU.
  • Create a simple network in your user program
  • Use the PLC tags in the tag table for addressing the instructions
  • Inserting new networks and deleting them
  • Adding empty box, open and close branch as well as inserting inputs
  • Program blocks and main OB
  • Bit Logic Instructions NO, NC, COIL
  • Word Logic Operations, AND, OR NOT, NAND, XOR, XNOR
  • Assignments and negative assignments
  • Set/reset coil with flip-flops
  • Timers TP, TON, TOFF and time accumulators
  • Counters UP, DOWN, UP/DOWN
  • Range and validity functions
  • Comparator Like equal to, not equal to, less than, greater than etc.(= ,> ,< ,>= ,<= )
  • Arithmetic Functions like add sub,MUL,DIV,MOD,NEG,INC,DEC,ABS ,MIN,MAX,LIMIT
  • Advance Functions like SWAP, CONVERT, CEIL, FLOOR
  • Special Functions
  • Plc tags and adding new tag table
  • Plc data types, int, float, double, byte etch and how to add them
  • Plc trouble shooting and maintenance
  • Watch and force table and how to add them in project
  • Introduction to analog and digital sensors
  • PT100, opt electrical, limit switches
  • Integration of sensors with plc and taking values in TIA
  • Calibrating analog sensors RTD and Thermocouple
  • Reading analog sensor value from TIA portal
  • Going online problems and theirs solutions
  • Intro to VFD and frequency drives
  • VFD parameter setting in FUJI
  • Connect VFD with PLC and control by current change
  • HMI (Human Machine Interface) Section
  • Learn to Program  WIENTEK HMI
  • Learn to design in Utility manager
  • Creating tags in HMI in utility manager
  • Adding buttons ,lamps , numeric inputs and outputs
  • Connect HMI with plc
  • Download program in HMI as well as online and offline simulations
  • Hmi and plc connection problems and solutions
  • Reading  senor value at HMI
  • Controlling motors from HMI
  • Introduction to SCADA


  • https://burraq.org/plc-training-with-scada-hmi/Quick Review of PLC HMI SCADA Level 1 Course.
  • Jump and Label instruction in TIA Portal S7 1200/300/400 PLC
  • How to make Functions (FC) in TIA Portal
  • What is Cross Reference?
  • FCs calling in Main (OB)
  • Difference between FC and FB
  • How to make FB in TIA and How to call it
  • Force Table & Watch table
  • How to add multiple racks and connection of IM with another IM on TIA Portal
  • Uploading a PLC Program
  • RTUs concept using Profibus
  • Motor Control with VFD
  • Parameters setting of Analog IO’s in VFD from control terminals
  • Connections of Analog IO’s (0-10V or 4-20mA)
  • Forward Reverse of Motor using keypad
  • Forward reverse of Motor from external signal
  • Controlling the Motor Acceleration and Deceleration time
  • Frequency setting range up to 120Hz
  • PLC wiring of Analog IO’s with VFD
  • Motor Speed control using VFD through PLC Motor Speed control from thermocouple through temperature.
  • Read and Write major parameter of VFD on HMI (weintek) via MODBUS RTU using RS485
  • Two VFD’s/Motors Operate with their feedback (Master Slave VFDs


  • Quick Review of Level 1  Level 2
  • DB Block in Detail
  • FB Block in Detail
  • FC Block in Detail
  • UDTS
  • PID
  • PLC Safety Circuit
  • Web Server
  • MCR
  • WINCC Explorer SCADA.
  • WINCC Explorer SCADA Graphic Designing
  • WINCC Explorer SCADA Reporting
  • WINCC Explorer SCADA connection with SQL Database by taking value of temperature/pressure/flow/level etc.
  • Alarm Logging
  • Tag logging & Trend display
  • Gauges, sliders, motors, pipes, tanks and other object designing on
  • More Animations
  • Scripting


  • S7-Communication
  • PUT/GET Instruction
  • PLC to PLC Communication
  • Master Slave Communication
  • Redundant System
  • Fail-Safe PLC System
  • OPC UA
  • OPC DA
  • MQTT
  • Real-time Plant Project

E. Servo & Stepper Motion Control with S7-1200

  • Introduction
  • Difference between Servo and Stepper Motor
  • Overview of PLC based motion
  • HSC and PTO in S7-1200
  • How to generate PTO in S7-1200
  • Hardware wiring of Motor and Driver
  • Configuration Of Positioning Axis
  • Commissioning Of Axis
  • Programming of basic motion control functions
  • Axis Power and Axis Reset
  • Axis JOG Operation
  • Axis Homming Operation
  • Axis MoveRelative Motion Control
  • MC_MoveAbsolute
  • Difference between MC_Relative and MC_MoveAbsolute
  • Axis MC_MoveVelocity
  • Axis MC_Halt

F. Industrial IoT & Industry 4.0

  • What is IIoT | IoT vs IIoT
  • IIoT Model, Architecture, Platforms, Components, Features & Benefits
  • Download Siemens TIA Portal & IIoT/MQTT Software’s
  • Download Mosquitto MQTT Broker and MQTT Explorer
  • Understanding MQTT
  • MQTT Demonstration with Mosquitto Broker and MQTT Explorer
  • MQTT Demonstration with Public MQTT Broker
  • TIA Portal Communication with Local MQTT Broker (Mosquitto)
  • LMQTT Library Overview
  • TIA Portal with Local MQTT Broker
  • Introduction to Node Red
  • How to Install Node-Red on Windows?
  • Node-Red With PC
  • Basic Features of Node-Red
  • Basics of Node Red
  • Inject
  • Node-Red Debug
  • Node Red Visualization
  • Node-Red Dashboard
  • Node-Red Dashboard(Gauge)
  • Node-Red Dashboard(Graph)
  • Node-Red Dashboard
  • Data Manipulation
  • Parsing
  • TIA Portal with MQTT Broker and Nod-red

Course Content

About the instructor

0 (0 ratings)

45 Courses

2 students

Durations: 256 hours
Lectures: 0
Students: Max 0
Level: Intermediate
Language: English
Certificate: Yes
Notice bar for all your custom notifications for your site visitors. Tweak them as you like using flexible options.