ETAP Level 1

Firstly, ETAP (Electrical Transient Analysis Program) is a software tool for the analysis and simulation of power systems. Etap Level 1 Training in Lahore refers to the basic version of the software, which includes functions such as load flow analysis, short circuit analysis, and coordination of protection devices. Secondly, It is commonly used by electrical engineers and power system analysts to model and analyze the behavior of power systems under normal and fault conditions. Thirdly,  the ETAP Level 1 training course is designed to teach an individual to use the basic functions of the ETAP software.

  • creating a new project and creating a single-line diagram
  • create a new project and create a new project
  • configuration and analysis of protection devices
  • report generation and verification of results

Firstly, The Etap Level 1 training can deliver in a classroom setting, online, or through self-study. Depending on the training provider, the course may be aimed at beginners or those with some experience in power systems analysis. Secondly,  Etap Level 1 best institute providers may also provide a certificate of completion. It is best to ask the provider for more details on the content, format, and certification.


Course Details

ETAP training courses are categories by skill level, length, and subject matter. Find a course that suits your needs and advance your knowledge. Firstly,  The aim of this course is to learn power system modeling and analysis using ETAP software Training. In this course, ETAP software. ETAP Training institute near me is the most powerful software used in the power industry for power system calculations. Secondly, This course will improve the ability of engineers to understand and conduct power system studies on their own, ultimately benefiting career development. 

Burraq Engineering solution provides the Best Etap Training course in Lahore Pakistan. Power system hardware must withstand not only the nominal voltage. Which is related to the highest voltage of a particular unit but also short-level voltages. Firstly, One of the key issues related to voltages is arc flashover operation, which is mainly base on short circuit and relay coordination studies.

  1. ETAP Software Installation
  2. Introduction to ETAP Software
  3. How to Create a New Project in ETAP
  4. How to Load the existing Project
  5. Introduction to ETAP Database
  6. ETAP toolbar introduction
  7. One Line Diagram in ETAP
  8. Create your first one-line diagram
  9. Composite Network in ETAP
  10. Customize the library for the relay breaker and fuse
  11. Creating a template and importing it to one line diagram
  12. Load Flow Study Evaluation and Result Analysis
  13. Run Load Analysis on Single Line Diagram
  14. Equipment Evaluation
  15. Voltage Drop Calculations 
  16. Bus Voltages, Cable voltage Drops
  17. Bus Under voltage 
  18. Cable overload 
  19. Cable Sizing Studies
  20. Transformer Overload 
  21. Transformer Sizing
  22. Alert View in ETAP 
  23. Critical and Marginal Conditions in ETAP
  24. Arc Flash and Short Circuit Analysis
  25. Run Short circuit and Arc Flash Analysis
  26. Short Circuit Current Evaluation 
  27. How to Fault a bus 
  28. Edit Study Case 
  29. Motor Start Analysis
  30. Setting up the Motor Rating 
  31. Motor Start static
  32. Setting up the Motor Events in Edit Study Case 
  33. Starting Current and its Plot in ETAP 
  34. Motor Start Dynamic
  35. Setting up the Motor Parameters 
  36. Setting up the Motor Inertia, Load
  37. Motor Start Dynamic using VFD
  38. Breaker Settings 
  39. CT settings 
  40. How to generate a report on ETAP 
  41. Introduction to ETAP Level 2 Training

ETAP Level 1 provides a comprehensive set of electronic engineering software solutions, including load current, short circuit, transient impedance, amplifier synchronization, cable power, optimal power current, etc. Its modular throughput can be customized to meet the needs of any company from small to large power systems. The ETAP real-time function is an integrated suite of electronic software programs that can provide intelligent power monitoring, power management, system optimization, advanced automation, and real-time prediction.

ETAP Smart Grid enables sensing applications to use tools for secure network planning, synchronization, and execution. This real-time system can manage, control, virtualize, optimize, and automate power transmission and distribution networks. ETAP Level 1 Training in Lahore is the most conceptual business solution for the design, simulation, implementation, control, optimization, and automation of production, transmission, power distribution, and industrial power systems. Etap Course is designed according to a quality assurance plan and is used as an effective high-level software worldwide. ETAP Software is designed in seven languages and can translate report output into eight languages. As a completely integrated business solution, 

ETAP Level 1 has been deployed into a real-time power management system to monitor, control, automate, simulate, and optimize the operation of the power system. The ETAP basic software package is a set of core tools, enhanced analysis modules, and engineering libraries, which can be used to create, configure, customize, and manage system models. The speed and simplicity of one-line diagrams use an unlimited number of elements and buses (including small tools and basic components) to build single-phase and three-phase AC and DC networks. The engineering library provides a complete and complete database of published manufacturing equipment data.


  • Embedded analysis module
  • The concept of Kabul
  • Transmission line concept
  • Cable current carrying capacity
  • Cable measurement
  • Cable Management
  • Reduce risk and improve safety
  • Ease and speed of evaluating results and making decisions
  • Multilingual editing
  • Faster than similar real-time solutions
  • Power Management System
  • Energy Management System
  • Production Management System
  • Distribution Management System
  • Intelligent load release
  • Smart network and microgrid solutions


Network Analysis-Integrated AC and DC System

ETAP is a set of fully integrated AC and DC power system analysis tools. Engineers from thousands of companies and electrical organizations around the world use ETAP software in power system design, analysis, maintenance and operation. The DC network uses the same database as the AC module. DC power flow and DC short circuit provide engineers with distraction performance for designing and maintaining DC power systems. Storage and capacity estimation analysis are used to select the most appropriate battery pack and verify the maximum capacity of existing batteries. , And simple simulation within a certain range of standby, control and other DC conditions.

Real-time monitoring and simulation

ETAP real-time system is a set of software tools that provide a fully integrated enterprise solution. Through continuous monitoring, simulation, electrical optimization, processing, manufacturing and appropriate management systems, ETAP can maximize the processing of the entire product, reduce losses and increase profits.

Protection equipment-equipment cooperation, selection

ETAP protection equipment coordination is a new concept in steady-state and dynamic  equipment coordination, selection protection and testing. This is achieved through the use of smart one-line diagrams, integrated equipment databases, and integrated three-dimensional databases. Protection is a complete integration in ETAP. Module.

Automatic relay test and transient simulation

The ETAP automatic relay test and transient simulation system (ARTTS) contains three high-precision test equipment in a set of equipment. ARTTS can test a variety of protection relays including distance relays, electric energy meters, and sensors. ARTTS electric energy system tools use advanced hardware and Software technology is used to test, simulate, and verify the relay, and compare the actual test response with the manufacturer’s data.

Distribution board system-ANSI and IEC

The switchboard system module developed for electrical design and engineers combines the graphical user interface and the intelligence of ETAP to simply design and analyze low-voltage power distribution systems. Combined with existing features and advanced functions, the switchboard system is a high-quality The electrical tools you can only see among the leaders of power system analysis software.

Grounding grid system

The grounding grid system module allows engineers to quickly and accurately analyze grounding protection. The combination of advanced 3D technology and one-line diagram allows engineers to visualize their grounding system and directly use the short-circuit calculation results. Flexible design methods can quickly and automatically design layouts or very Detailed scheme. Color-coded graphic drawing provides impressive results.

User-defined dynamic model

The user-defined dynamic model (UDM) has established and compiled the control block diagram for the ETAP transient stability and generator start-up modules. The UDM module can be used for independent settings of multiple motors in unlimited projects. UDM confirmed load rejection through the model , Load acceptance, terminal bus failure and dynamic response provide independent self-test.

Cable Thermal Stability Analysis

Cable thermal stability analysis helps engineers design and operate the maximum potential cable system to provide safe and reliable operation. The advanced graphical interface allows the design of cable duct systems to meet the existing requirements by using accurate calculations to determine the required cable size, physical characteristics and maximum corrected current carrying capacity And future needs. In addition, transient temperature analysis calculates the cable current temperature properties, reducing the risk of damage to the cable system in emergencies

Cable tension

Precisely predicting the cable tensile strength is necessary for the cable design itself. This knowledge can avoid underestimated or conservatively estimated design during construction to obtain material capital savings. The cable tensile module calculates multiple cables of different sizes and allows the three-dimensional tensile geometric path of the load A point-to-point calculation method is performed at each elbow and the tension point. Forward and reverse tension calculations determine the best tension direction.

Control System

ETAP perfectly combines power analysis and circuit control in one electrical analysis program. Control System Diagram (CSD) simulates the operation sequence of control equipment such as solenoids, relays, control contactors, multi-sequence contactors, and brakes containing excitation conditions The control system diagram can determine the trip and out-of-step voltages, losses, current flow at any time, and comprehensive boundary and critical alarms. The huge database and equipment allow engineers to quickly model and simulate a fixed time delay and the control chain The associated relay action.

Data Exchange

The ETAP data exchange module (DataX) is used to input, output, and synchronize data from external data sources and ETAP. Data exchange converts legacy data to ETAP as an interface between ETAP and external software, such as GIS systems, AutoCAD, micro workstations or synchronized ETAP and Other applications. User-defined data mapping. Intelligent error correction and automatic generation of one-line diagrams are the most practical in data exchange.


The ETAP GIS map adds the corresponding geographic maps of the power generation, transmission, and distribution systems in the electrical one-line diagram. Synchronize relevant electrical equipment information from GIS to ETAP and maintain the relationship between them. You can view GIS maps without limitation in ETAP, and you can also operate GIS maps when using ETAP. The analysis result is displayed in the geographic map as an easy-to-see power system status view in the GIS map.



ETAP Level 1

Scroll to Top